Forklift Training Program Markham

Forklift Training Program Markham - Lift trucks are sometimes called jitneys, hi los or lift trucks. These powered industrial trucks are used widely nowadays. Department stores utilized forklifts to unload merchandise from trailers. Warehouses use them for tiering merchandise. And grocery stores make use of small models to drop supplies in the aisles. Whether loading material at a construction site or transporting lumber at a sawmill, operators of forklifts must be trained correctly and certified. The main concern must be on the safety of the worker and pedestrian. This forklift training program teaches the health and safety regulations governing forklifts in order to ensure their safe and efficient use.

Forklift Training Program Safety Tips:

Proper training ensures that forklift operators can maintain control of the forklift throughout traveling, lifting and tilting. Just trained operators must drive a forklift.

When the forklift is in operation; head, arms, hands, feet and legs should be kept inside the forklift. Forklift forks must be kept low to the ground while being slightly tilted back. Observe posted traffic signs. Sound the horn and lessen speed if taking a corner. If the driver's vision is blocked by the load, slowly drive backwards. Pre-inspect the ground for possible hazards, such as objects, wet or oily spots, holes, rough patches, vehicles and people. Avoid stopping immediately.

If a vehicle or a person crosses the lift truck's blind spot, stop the truck, lower the load, and do not travel until the path is clear. If traveling on an incline, the forks should be pointed downhill without a load and uphill with a load. The lift truck should just be turned around if on level ground.

Safety guidelines while steering - When traveling at good speeds, never turn the steering wheel sharply. Support the load making use of the front wheels and turn utilizing the rear wheels. A truck that is overloaded would be difficult to steer. Follow load limitations. Never add a counterweight as a way to improve steering.

Safety guidelines while loading - The forklift's suggested load capacities must be followed; the information can be found on the data plate. Always make certain that the load is positioned according to the suggested load centre. The forklift would remain stable as long as the load is kept close to the front wheels.

Before inserting the forks into the pallet, the forklift mast must be in an upright position. Level the forks before inserting them.

Click to Download the pdf